大运北京塞车pk10官网

Welcome to the website of Hohhot Chuangnuo Packaging Materials Co., Ltd.!
Packaging machinery + packaging supplies one-stop service provider!

There are many types of packaging equipment, complete specifications, and can be customized according to various special specifications

15847189222

support hotline

What are the solutions to the failure of the automatic baler?

Author: admin Published: 2019/12/3 Hits: QR code sharing

The decisive factor for the rapid development of enterprises in the 21st century is the development trend of automation. With the development of modern automation, the automatic baler equipment will occupy a large proportion in the future development of enterprises. Fully automatic baler is one of the baler series. Compared with semi-automatic baler, it realizes the fully automatic operation of the baler. This type of machine uses a fully automatic design based on the original baler, which is simpler to operate and more durable. It is an ideal baler. 创诺包装材料有限公司 分享 内蒙古打包机 故障维修知识,一般来说,打包机比较常见的故障有如下几种: The following Chuangnuo Packaging Materials Co., Ltd. shares the fault repair knowledge of Inner Mongolia packing machine .


自动打包机


1. The phenomenon of jamming is mainly that the tape is stuck in the middle of the roller and cannot run, or the foreign matter is blocked and cannot be removed, resulting in a cassette. At this time, a technician or operator is required to remove the washer of the hex nut and loosen the middle Connect the two M5 countersunk head screws on the shaft center. Since these two screws are fixed on the notched part of the connection shaft center, the screws must be turned up. , And then restore the machine to its original state, simple operations, I believe you can do better.


2. After the strapping, the baler does not cut the tape. Generally, this happens mostly because the strap is too tight. The operator needs to adjust the tightness.


3. The baler does not pull out the belt. This kind of failure is relatively common. The operator should check whether the "outlet length adjustment" is at "0" and then see if the process of passing through the belt is correct; if not, see if there is a card near the belt roller. Live foreign body.


打包机故障维修


Warm reminder: In the daily work, when a baler failure occurs, repair should be performed according to the relevant symptoms of the machine, and must not be handled without authorization, otherwise, the machine may be damaged due to improper operation, resulting in irreparable consequences As a manufacturer of packaging equipment such as packers, carton sealers, etc., we better solve problems for the benefit of customers and machinery and equipment, and it is best to ask specialized personnel to handle it. In addition, the packer or other packaging machinery and equipment need to be used reasonably. Items outside the load range of the packer cannot be packed. Usually, operators should pay more attention to the inspection and maintenance of the machine. This will reduce the failure and extend the packer. Life can also play a role.


Disclaimer: The text and pictures are from the Internet. If there is any infringement, please contact to delete it. Thank you!





Customer case

CASE SHOW

Express Lane

Project through train:
Chuangnuo Machinery
Trono Consumables
Sticky recommendation:
Introduction and repair of automatic box sealing machine and vacuum packaging machine
The importance of choosing a good sealing machine manufacturer
Semi-automatic baler / low table strapping machine
Precautions for repair and maintenance of semi-automatic baler
Ten guidelines for automatic balers
What to do if the automatic packer fails?
Box sealing machine manufacturers recommend: FX-JB01 automatic corner edge box sealing machine
Product introduction
Single motor semi-automatic baler
Semi-automatic baler 730AA
Automatic baler
Automatic baler
Inner Mongolia baler-semi-automatic low-platform baler
Chuangnuo packaging high-end semi-automatic strapping machine B-80
KZB-I leading high platform semi-automatic baler
Inner Mongolia baler-semi-automatic baler SX-200
宁夏 箱 封 机 -MG-6050 Automatic sealing machine (up and down drive type)
宁夏 箱 封 机 -MG-5050 Automatic sealing machine (left and right drive type)
Shanxi semi-automatic baler SX210
Inner Mongolia semi-automatic baler SX-300
Inner Mongolia baler-semi-automatic baler
Non-woven wrapping machine
Swing arm type automatic film winding machine
Roll wrapping machine
Shaanxi packing belt——PET plastic steel belt
Automatic film winding machine
Shaanxi packing belt
MH-FJ-2 Pneumatic Ningxia Carton Sealer
MH-FJ-MD Automatic Ningxia Carton Sealer
MH-FJ-MA Automatic Ningxia Carton Sealer
Semi-automatic Inner Mongolia Baler
MH-106A Automatic Pressure Baler
MH-201 Automatic Inner Mongolia Baler
MH-105B Fully automatic sword type baler
MH-105A Automatic Horizontal Packer
MH-104A Automatic Shanxi Baler
MH-103B unmanned baler
MH-103A Automatic Inner Mongolia Baler
MH-102A Automatic unmanned baler
MH-101B Automatic Shanxi Baler
MH-101A Automatic Packer
support hotline

15847189222 15847189222

Email: 292546022@qq.com

QQ: 292546022

呼和浩特市创诺包装材料有限公司

chuangnuo packaging

contact details

all rights reserved:

Hohhot Chuangnuo Packaging Materials Co., Ltd.

Record number: Mongolia ICP No. 16002846-2 Site Map RSS XML Shanxi | Inner Mongolia | Shaanxi | Ningxia |

Contact Manager Hu: 13733719377 Total Zhao: 15847189222 15304717314

Address: Bakouzi Village, Youyouban Town, Huimin District, Hohhot, Inner Mongolia Autonomous Region: 292546022@qq.com

Technical support: Vision e-commerce 万家灯火

二维码
online service
二维码 Sweep more exciting
support hotline:

15847189222