Ningxia Case sealer machine is mainly suitable for carton sealing and packaging. It can be used alone or in combination with the assembly line. It can be operated in a single carton, or it can be used with a carton forming unpacker, cartoner, and paste The labeling machine, strapping machine, pallet stacker, conveyor and other equipment are used as packaging lines and are necessary equipment for packaging line operations. Sealing machines are Jinan's agent products. They are mainly divided into: automatic capping and sealing machine series, pneumatic adjustment and sealing machine series, automatic box sealing machine series, corner type box sealing machine series, four corner side box sealing machine, I-shaped Box sealing, etc. The box sealing methods can be divided into: up and down driving, left and right driving, sides, corners, etc. Generally, transparent tape and kraft paper are used.
1. The sealing machine's nail clamping action is too slow or the nail clamping stroke is insufficient: the bolts are loose, the front buckle or the inner plate of the board is worn. At this time, you can tighten the bolts and pay attention to the correct position of the front pin. You can also replace the front buckle or the inner plate of the board. After completing the above actions, test its function. If the stroke is too short, fine-tune the front buckle up, and if the movement is slow, fine-tune the front buckle down.
2. Air leakage at the piston rod: The ring at the bottom of the main body is damaged. 环； The ring should be replaced at this time ;
3. Air leakage at the exhaust port: the valve ring or switch seat ring is damaged or the piston ring is damaged. Replacement ring
4. The switch valve ring or switch seat ring is damaged. Replacement ring
5. The transmission ring is loose and cannot be positioned: the plastic steel bar and the transmission spring are inelastic. Remove the plate machine assembly, and reinstall the spring tip or replace the plastic steel bar and transmission spring.