大运北京塞车pk10官网

Welcome to the website of Hohhot Chuangnuo Packaging Materials Co., Ltd.!
Packaging machinery + packaging supplies one-stop service provider!

There are many types of packaging equipment, complete specifications, and can be customized according to various special specifications

15847189222

support hotline
Precautions for repair and maintenance of semi-automatic baler

Introduction—— Semi-automatic packer does not cut off automatically or cut off or continuous action after inserting the tape, which is a headache for many packaging operators. The following is the question of Chuang Nuo Packaging for semi-automatic packer.

Phone: 15847189222 15847189222

Content details

Scan your phone
Semi-automatic packer does not cut off automatically or cut off or continuous action as soon as the tape is inserted, which is a headache for many companies' packaging operators. The following is the fault cause and solution of Chuangnuo Packaging for the problem of semi-automatic packer, in case Need.

I. Reasons and solutions for tightening

1. The micro switch LS-1 at the skateboard is broken or disconnected and needs to be replaced.

2. The clutch coil breaks and loses its effect and needs to be replaced.

3. The circuit board is broken and needs to be replaced.

4. The belt is broken and needs to be replaced.


半自动打包机


2. After the tightening, a "squeak, squeak, squeak" sound is issued, and the reasons and solutions are not cut:

1. Packed with thick and thin. (The user changes the type of packing belt). Need to replace rollers

2. There is a foreign object between the upper and lower extensions. Foreign matter must be cleaned (such as packing tape, tape, paper shell, etc.)

3. The gap between the rollers is not adjusted or the rollers are worn out. Adjust or replace

4. The electronic components of the cutting belt are damaged (the shaft side of the lower extension pulley). Replacement of new accessories


半自动打包机


3. After the tightening, there is no sound, and the reasons and solutions are not cut:

1. Motor overload is easy to burn fuse.

2. The electronic components of the cutting belt are damaged (the shaft side of the lower extension pulley). Replacement of new accessories

3. The clearance of the electromagnetic clutch is too large. Adjustment gap

Fourth, the reason for cutting the tape and the solution:

1. The electronic components of the cutting belt are damaged (the shaft side of the lower extension pulley). Replacement of new accessories

2. The tightness adjustment is too loose. Adjust tightness

3. The electromagnetic clutch gap is too small or no gap. Adjusting the clearance of the clutch

4. The circuit board is broken. Replace the circuit board.


半自动打包机


V. Reasons and solutions for continuous action after insertion:

1. The micro switch LS-3 is broken or the fixing bracket is loose. Replace the switch or adjust the bracket

2. The circuit board is broken. Replace the circuit board

3. The electromagnetic clutch gap is too small or no gap. Adjusting the clearance of the clutch

Leave message

message
扫一扫更精彩 Sweep more exciting
  • Contact: Mr. Zhao
  • Phone: 15304717314
  • Landline: 15847189222
  • 400 Tel: 15847189222
  • Email: 292546022@qq.com
  • Address: Bakouzi Village, Youyouban Town, Huimin District, Hohhot, Inner Mongolia
在线客服

If you are interested in this product! Please contact Hohhot Chuangnuo Packaging Materials Co., Ltd. directly!

related suggestion

HOT RECOMMEND

Express Lane

Project through train:
Chuangnuo Machinery
Trono Consumables
Sticky recommendation:
Introduction and repair of automatic box sealing machine and vacuum packaging machine
The importance of choosing a good sealing machine manufacturer
Semi-automatic baler / low table strapping machine
Precautions for repair and maintenance of semi-automatic baler
Ten guidelines for automatic balers
What to do if the automatic packer fails?
Box sealing machine manufacturers recommend: FX-JB01 automatic corner edge box sealing machine
Product introduction
Single motor semi-automatic baler
Semi-automatic baler 730AA
Automatic baler
Automatic baler
Inner Mongolia baler-semi-automatic low-platform baler
Chuangnuo packaging high-end semi-automatic strapping machine B-80
KZB-I leading high platform semi-automatic baler
Inner Mongolia baler-semi-automatic baler SX-200
宁夏 箱 封 机 -MG-6050 Automatic sealing machine (up and down drive type)
宁夏 箱 封 机 -MG-5050 Automatic sealing machine (left and right drive type)
Shanxi semi-automatic baler SX210
Inner Mongolia semi-automatic baler SX-300
Inner Mongolia baler-semi-automatic baler
Non-woven wrapping machine
Swing arm type automatic film winding machine
Roll wrapping machine
Shaanxi packing belt——PET plastic steel belt
Automatic film winding machine
Shaanxi packing belt
MH-FJ-2 Pneumatic Ningxia Carton Sealer
MH-FJ-MD Automatic Ningxia Carton Sealer
MH-FJ-MA Automatic Ningxia Carton Sealer
Semi-automatic Inner Mongolia Baler
MH-106A Automatic Pressure Baler
MH-201 Automatic Inner Mongolia Baler
MH-105B Fully automatic sword type baler
MH-105A Automatic Horizontal Packer
MH-104A Automatic Shanxi Baler
MH-103B unmanned baler
MH-103A Automatic Inner Mongolia Baler
MH-102A Automatic unmanned baler
MH-101B Automatic Shanxi Baler
MH-101A Automatic Packer
support hotline

15847189222 15847189222

Email: 292546022@qq.com

QQ: 292546022

呼和浩特市创诺包装材料有限公司

chuangnuo packaging

contact details

all rights reserved:

Hohhot Chuangnuo Packaging Materials Co., Ltd.

Record number: Mongolia ICP No. 16002846-2 Site Map RSS XML Shanxi | Inner Mongolia | Shaanxi | Ningxia |

Contact Manager Hu: 13733719377 Total Zhao: 15847189222 15304717314

Address: Bakouzi Village, Youyouban Town, Huimin District, Hohhot, Inner Mongolia Autonomous Region: 292546022@qq.com

Technical support: Vision e-commerce 万家灯火

二维码
online service
二维码 Sweep more exciting
support hotline:

15847189222